10:20 📶 🔋
‹ CSIP-AUS Compliance Setup
🇦🇺
CSIP-AUS Compliance
Australian regulations require CSIP-AUS compliance for grid-connected solar systems.
Please select your system type:
🔌 Grid-connected Mode ›
Your system is connected to the grid. Voltello LinkPro device installation is required for CSIP-AUS compliance.
🏠 Permanently Off-grid ›
Your system operates permanently and independently from the grid — not temporarily off-grid. No Voltello LinkPro device required.
ⓘ This selection cannot be changed after confirmation. Please choose carefully.
⚠️
Configuration Error
Your system is not configured as permanently off-grid.

This option is only for systems that are never connected to the grid. If your system is temporarily off-grid or grid-connected, please select "Grid-connected Mode" instead.
🔌
Confirm Selection
You have selected Grid-connected Mode. This will require Voltello LinkPro installation.

This selection cannot be changed later.
⚠️
Firmware Upgrade Required
CSIP-AUS Compliance requires firmware version v1.11.99 or later.

Current version: v1.10.50
Required version: v1.11.99+

Please upgrade your firmware before setting up CSIP-AUS Compliance.